Case Studies


Domestic Heat Pump Installation

Reason For Using Heat Pump

Due to building regulations and reduced running costs

The Solution

A highly efficient, five star Stiebel Eltron ground source heat pump was installed.

A specialist drilling company were used to drill boreholes to provide the ground loops due to the ground type not being suitable for standard ground loops. Underfloor heating was installed on both floors with towel rails in the bathrooms. 600L buffer with hot water coil for instant hot water.

The Result

Fuel cost saving up to 40%.

Warm house all year round and lots of hot water.

I would definitely recommend them, the work was carried out to an extremely high standard

Dallas Young, Home Owner


Key Facts

Fuel Consumption


40% saving compared to oil boiler

Estimated C02 Saving

45% (compared to oil)

Average Project Cost

£16 - 26,000

RHI Approved (payback over 7 years)

Average payments of £3,780pa

Project Payback Period

7 years

Total Payback (including fuel saving)

£26,400 (Plus continued fuel saving after 7 year period)

Financial information based on average project this size. Estimated figures not guaranteed. RHI figures at time of install. Cost based on 15p/kWh

Join Us On Twitter

Contact our team on 01463 870 057 or to discuss how R & I Cruden can meet your requirements.

  • Gunmatic
  • Lindner
  • Solarfocus
  • Biotech
  • Stiebel
  • Vaillant